SSR Bearings

Bearing With Seal	Shaft Dia	Mass (kg)	Dimensions (d)	Tolerance (d)	Dimension (D)	Tolerance (D)	Dimensions (B)	Tolerance (B)	Dimensions (C)	Tolerance (C)	Dimensions (dk)	Angle	Chamfer Dim R1s	Chamfer Dim R2s	Mounting (da) max	Mounting (Da) min	Load Ratings (dynCkN)	Load Ratings (statCokN)	Radial Internal Clear
SBM 15FO-2RS	15	0,046	15	-0,008	30	-0,009	16	-0,12	10	-0,24	25	16	0,3	0,3	19,2	24	21,2	106	0,040-0,082
SBM 17FO-2RS	17	0,077	17	-0,008	35	-0,011	20	-0,12	12	-0,24	29	19	0,3	0,3	21	27,5	30	146	0,040-0,082
SBM 20FO-2RS	20	0,15	20	-0,010	42	-0,011	25	-0,12	16	-0,24	35,5	17	0,6	0,6	25,2	33	48	240	0,050-0,100
SBM 25FO-2RS	25	0,19	25	-0,010	47	-0,011	28	-0,12	18	-0,24	40,7	17	0,6	0,6	29,5	38	62	310	0,050-0,100
SBM 30FO-2RS	30	0,29	30	-0,010	55	-0,013	32	-0,12	20	-0,30	47	17	0,6	1	34,4	44,5	80	400	0,050-0,100
SBM 35FO-2RS	35	0,38	35	-0,012	62	-0,013	35	-0,12	22	-0,30	53	16	0,6	1	39,7	51	100	500	0,060-0,120
SBM 40FO-2RS	40	0,54	40	-0,012	68	-0,013	40	-0,12	25	-0,30	60	17	0,6	1	44,7	57	127	640	0,060-0,120
SBM 45FO-2RS	45	0,68	45	-0,012	75	-0,013	43	-0,12	28	-0,30	66	15	0,6	1	50	63	156	780	0,060-0,120
SBM 50FO-2RS	50	1,4	50	-0,012	90	-0,015	56	-0,15	36	-0,40	80	17	0,6	1	57,1	75	245	1220	0,060-0,120
SBM 60FO-2RS	60	2	60	-0,015	105	-0,015	63	-0,15	40	-0,40	92	17	1	1	67	87	315	1560	0,072-0,142
SBM 70FO-2RS	70	2,9	70	-0,015	120	-0,015	70	-0,15	45	-0,40	105	16	1	1	78,2	99	400	2000	0,072-0,142
SBM 80FO-2RS	80	3,5	80	-0,015	130	-0,018	75	-0,20	50	-0,50	115	14	1	1	87,1	108	490	2450	0,072-0,142

Bearing With Seal	Shaft Dia	Mass (kg)	Dimensions (d)	Tolerance (d)	Dimension (D)	Tolerance (D)	Dimensions (B)	Tolerance (B)	Dimensions (C)	Tolerance (C)	Dimensions (dk)	Angle	Chamfer Dim R1s	Chamfer Dim R2s	Mounting (da) max	Mounting (Da) min	Load Ratings (dynCkN)	Load Ratings (statCokN)	Radial Internal Clear
SBM 90FO-2RS	90	5,4	90	-0,020	150	-0,018	85	-0,20	55	-0,50	130	15	1	1	98,3	123	610	3050	0,085-0,165
SBM 100FO-2RS	100	5,9	100	-0,020	160	-0,025	85	-0,20	55	-0,50	140	14	1	1	111,2	134	655	3250	0,085-0,165
SBM 110FO-2RS	110	9,6	110	-0,020	180	-0,025	100	-0,20	70	-0,50	160	12	1	1	124,8	150	950	4750	0,085-0,165
SBM 120FO-2RS	120	15,1	120	-0,020	210	-0,030	115	-0,25	70	-0,60	180	16	1	1	138,4	173	1080	5400	0,085-0,165
SBM 140FO-2RS	140	18,8	140	-0,025	230	-0,030	130	-0,25	80	-0,60	200	16	1	1	151,9	191	1370	6800	0,100-0,192
SBM 160FO-2RS	160	24,7	160	-0,025	260	-0,035	135	-0,25	80	-0,70	225	16	1	1,1	180	219	1530	7650	0,100-0,192
SBM 180FO-2RS	180	35,4	180	-0,025	290	-0,035	155	-0,30	100	-0,70	250	14	1,1	1,1	196,1	239	2120	10600	0,100-0,192
SBM 200FO-2RS	200	44,8	200	-0,030	320	-0,040	165	-0,30	100	-0,80	275	15	1,1	1,1	220	267	2320	11600	0,100-0,192
SBM 220FO-2RS	220	50,9	220	-0,030	340	-0,040	175	-0,30	100	-0,80	300	16	1,1	1,1	243,6	295	2550	12700	0,100-0,192
SBM 240FO-2RS	240	64,9	240	-0,030	370	-0,040	190	-0,35	110	-0,80	325	15	1,1	1,1	263,6	319	3050	15300	0,110-0,214
SBM 260FO-2RS	260	81,7	260	-0,035	400	-0,040	205	-0,35	120	-0,80	350	15	1,1	1,1	283,6	342	3550	18000	0,110-0,214
SBM 280FO-2RS	280	96,5	280	-0,035	430	-0,045	210	-0,35	120	-0,90	385	15	1,1	1,1	310,6	370	3800	19000	0,110-0,214

Dimension Table - Dimensions in mm

Radial spherical plain bearings

Are complete units comprising inner and outer rings with a steel/steel or steel/bronze sliding contact surface
- The inner rings has a cylindrical bore and convex outer slideway
- The outer rings has a cylindrical outside surface and concave inner slideway - for diameters d = 320mm and above, the outer ring is split at two points and held together by retaining rings
Can support radial loads
Can transmit moment-free motion and loads

They can thus keep bending stresses away from the adjacent structure

Are particularly suitable for oscillating loads wit impact-type and shcok-type characteristics
Can support axial loads in both directions
Are lubricated via the outer and inner ring
- Exceptions are indicated in the dimension tables
- Under oscillating load, one side is relieved; this zone is lubricated as a result of the swivel motion.

Sealed radial spherical plain bearings requiring maintenance

Are protected against contaminants and spray by
- Lip sea

Shaft Diameter - 15 to 280


© 2002 SSR Bearings	Terms & Conditions of Use

Designed by WWW Marketing (Pty) Ltd

	The Spherical Plain Bearings can perform spatial oscillation motion even under load
	The bearings are sealed on both sides
	The bearings can support radial load
	The bearings can be re-lubricated
	The permissible operating temperature differs from the standard values
	Features
	The Rod Ends can perform spatial oscillation motion even under load
	The bearings can support axial loads
Close Window