SSR Bearings

Bearing With Seal	Shaft Dia	Mass (kg)	Dimensions (d)	Tolerance (d)	Dimension (D)	Tolerance (D)	Dimensions (B)	Tolerance (B)	Dimensions (C)	Tolerance (C)	Dimensions (dk)	Angle	Chamfer Dim R1s	Chamfer Dim R2s	Mounting (da) max	Mounting (db) max	Load Ratings (dynCkN)	Load Ratings (statCokN)	Radial Internal Clear
SBM 30FW-2RS	30	0,28	30	-0,01	55	-0,013	32	-0,12	20	-0,3	47	17	0,6	1	34,4	44,5	140	280	0-0,05
SBM 35FW-2RS	35	0,38	35	-0,012	62	-0,013	35	-0,12	22	-0,3	53	16	0,6	1	39,7	51	185	370	0-0,06
SBM 40FW-2RS	40	0,53	40	-0,012	68	-0,013	40	-0,12	25	-0,3	60	17	0,6	1	44,7	57	240	480	0-0,06
SBM 45FW-2RS	45	0,67	45	-0,012	75	-0,013	43	-0,12	28	-0,3	66	15	0,6	1	50	63	295	590	0-0,06
SBM 50FW-2RS	50	1,4	50	-0,012	90	-0,015	56	-0,15	36	-0,4	80	17	1	1	57,1	75	460	920	0-0,06
SBM 60FW-2RS	60	2,1	60	-0,015	105	-0,015	63	-0,15	40	-0,4	92	17	1	1	67	87	590	1180	0-0,072
SBM 70FW-2RS	70	3	70	-0,015	120	-0,015	70	-0,15	45	-0,4	105	16	1	1	78,2	99	750	1500	0-0,072
SBM 80FW-2RS	80	3,6	80	-0,015	130	-0,018	75	-0,2	50	-0,5	115	14	1	1	87,1	108	920	1840	0-0,072
SBM 90FW-2RS	90	5,3	90	-0,02	150	-0,018	85	-0,2	55	-0,5	130	15	1	1	98,3	123	1145	2290	0-0,085

Bearing With Seal	Shaft Dia	Mass (kg)	Dimensions (d)	Tolerance (d)	Dimension (D)	Tolerance (D)	Dimensions (B)	Tolerance (B)	Dimensions (C)	Tolerance (C)	Dimensions (dk)	Angle	Chamfer Dim R1s	Chamfer Dim R2s	Mounting (da) max	Mounting (db) max	Load Ratings (dynCkN)	Load Ratings (statCokN)	Radial Internal Clear
SBM 100FW-2RS	100	6	100	-0,02	160	-0,025	85	-0,2	55	-0,5	140	14	1	1	111,2	134	1230	2460	0-0,085
SBM 110FW-2RS	110	9,8	110	-0,02	180	-0,025	100	-0,2	70	-0,5	160	12	1	1	124,8	150	1790	3580	0-0,085
SBM 120FW-2RS	120	14,6	120	-0,02	210	-0,03	115	-0,2	70	-0,6	180	16	1	1	138,4	173	2010	4020	0-0,085
SBM 140FW-2RS	140	18,6	140	-0,025	230	-0,03	130	-0,25	80	-0,6	200	16	1	1	151,9	191	2560	5120	0-0,1
SBM 160FW-2RS	160	24,9	160	-0,025	260	-0,035	135	-0,25	80	-0,7	225	16	1	1,1	180	219	2880	5760	0-0,1
SBM 180FW-2RS	180	33,6	180	-0,025	290	-0,035	155	-0,3	100	-0,7	250	14	1,1	1,1	196,1	239	4000	8000	0-0,1
SBM 200FW-2RS	200	44,7	200	-0,03	320	-0,04	165	-0,3	100	-0,8	275	15	1,1	1,1	220	267	4400	8800	0-0,1
SBM 220FW-2RS	220	50,8	220	-0,03	340	-0,04	175	-0,3	100	-0,8	300	16	1,1	1,1	243,6	295	4800	9600	0-0,1
SBM 240FW-2RS	240	64	240	-0,03	370	-0,04	190	-0,35	110	-0,8	325	15	1,1	1,1	263,6	319	5700	11400	0-0,1
SBM 260FW-2RS	260	81,8	260	-0,035	400	-0,04	205	-0,35	120	-0,8	350	15	1,1	1,1	283,6	342	6700	13400	0-0,11
SBM 280FW-2RS	280	96,5	280	-0,035	430	-0,045	210	-0,35	120	-0,9	375	15	1,1	1,1	310,6	370	7200	14400	0-0,11

Dimension Table - Dimensions in mm

Radical spherical plain bearings

Are complete units comprising inner rings, out rings and maintenance-free sliding layers.
- The inner ring has a cylindrical bore and convex outer slideway
- The outer ring has a cylindrical outside surface and concave inner slideway in series SBM..UK-2RS with a bore diameter < 140mm, the outer ring is split at one point; with a bore diameter >/= 140mm, the outer ring is split at two points and held together by retaining rings in series SBM..FW-2RS with a bore diameter < 120mm, the outer ring is split at one point; with a bore diameter >/= 120mm, the outer ring is split at two points and held together by retaining rings
- Sliding layers are made from PTFE composite, PTFE foil or PTFE fabric (polytetrafluoroethylene)
Are preferably used to support radial loads
Are completely maintenance-free
- The life of bearings with a PTFE fabric is reduced if lubricant is used
Are used where:
- There are particular requirements on bearing life under maintenance-free operation
- Bearings with a metallic sliding contact surface are not suitable for lubrication reasons, e.g. under unilateral load.

Sealed maintenance-free radial spherical plain bearings

Are protected against contaminants and spray by lip seals

Shaft Diameter - 30 to 280


© 2002 SSR Bearings	Terms & Conditions of Use

Designed by WWW Marketing (Pty) Ltd

	The Spherical Plain Bearings can perform spatial oscillation motion even under load
	The bearings are sealed on both sides
	The bearings can support radial load
	The bearings can be re-lubricated
	The permissible operating temperature differs from the standard values
	Features
	The Rod Ends can perform spatial oscillation motion even under load
	The bearings can support axial loads
Close Window