![]() |
Bearing WithOut Seal |
Shaft Dia |
Mass (kg) |
Dimensions (d) |
Tolerance (d) |
Dimension (D) |
Tolerance (D) |
Tolerance (H) |
Dimensions (H) |
Dimensions (B) |
Tolerance (B) |
Dimensions (C) |
Tolerance (C) |
Dimensions (dk) |
Dimensions (d2) |
Dimensions (d3) |
Dimensions (s) |
Angle | Chamfer Dim R1s |
Chamfer Dim R2s |
Mounting (da) max |
Mounting (Da) min |
Load Ratings (dynCkN) |
Load Ratings (statCokN) |
SBA 10AW | 10 | 0,038 | 10 | -0,008 | 30 | -0,009 | 9,5 | -0,4 | 7,9 | -0,24 | 6 | -0,24 | 32 | 27,5 | 21 | 7 | 10 | 0,6 | 0,2 | 21 | 18,5 | 49 | 98 |
SBA 12AW | 12 | 0,07 | 12 | -0,008 | 35 | -0,011 | 13 | -0,4 | 9,3 | -0,24 | 9 | -0,24 | 37 | 32 | 24 | 8 | 9 | 0,6 | 0,2 | 24 | 21,5 | 65 | 130 |
SBA 15AW | 15 | 0,12 | 15 | -0,008 | 42 | -0,011 | 15 | -0,4 | 10,7 | -0,24 | 11 | -0,24 | 45 | 38,9 | 29 | 10 | 7 | 0,6 | 0,2 | 29 | 26 | 105 | 210 |
SBA 17AW | 17 | 0,16 | 17 | -0,008 | 47 | -0,011 | 16 | -0,4 | 11,5 | -0,24 | 11,5 | -0,24 | 50 | 43,4 | 34 | 11 | 6 | 0,6 | 0,2 | 34 | 30,5 | 118 | 236 |
SBA 20AW | 20 | 0,26 | 20 | -0,01 | 55 | -0,013 | 20 | -0,4 | 14,3 | -0,24 | 13 | -0,24 | 60 | 50 | 40 | 12,5 | 6 | 1 | 0,3 | 40 | 38 | 150 | 300 |
SBA 25AW | 25 | 0,39 | 25 | -0,01 | 62 | -0,013 | 22,5 | -0,4 | 16 | -0,24 | 17 | -0,24 | 66 | 57,5 | 45 | 14 | 7 | 1 | 0,3 | 45 | 39 | 258 | 516 |
SBA 30AW | 30 | 0,65 | 30 | -0,01 | 75 | -0,013 | 26 | -0,4 | 18 | -0,24 | 19,5 | -0,24 | 80 | 69 | 56 | 17,5 | 6 | 1 | 0,3 | 56 | 49 | 340 | 680 |
SBA 35AW | 35 | 1 | 35 | -0,012 | 90 | -0,015 | 28 | -0,4 | 22 | -0,24 | 20 | -0,24 | 98 | 84 | 66 | 22 | 6 | 1 | 0,3 | 66 | 57 | 520 | 1040 |
SBA 40AW | 40 | 1,6 | 40 | -0,012 | 105 | -0,015 | 32 | -0,4 | 27 | -0,24 | 22 | -0,24 | 114 | 98 | 78 | 24,5 | 6 | 1 | 0,3 | 78 | 64 | 745 | 1490 |
SBA 45AW | 45 | 2,5 | 45 | -0,012 | 120 | -0,015 | 36,5 | -0,4 | 31 | -0,24 | 25 | -0,24 | 130 | 112 | 89 | 27,5 | 6 | 1 | 0,3 | 89 | 74 | 970 | 1940 |
Bearing WithOut Seal |
Shaft Dia |
Mass (kg) |
Dimensions (d) |
Tolerance (d) |
Dimension (D) |
Tolerance (D) |
Tolerance (H) |
Dimensions (H) |
Dimensions (B) |
Tolerance (B) |
Dimensions (C) |
Tolerance (C) |
Dimensions (dk) |
Dimensions (d2) |
Dimensions (d3) |
Dimensions (s) |
Angle | Chamfer Dim R1s |
Chamfer Dim R2s |
Mounting (da) max |
Mounting (Da) min |
Load Ratings (dynCkN) |
Load Ratings (statCokN) |
SBA 50AW | 40 | 3,4 | 40 | -0,012 | 130 | -0,018 | 42,5 | -0,4 | 33,5 | -0,24 | 32 | -0,24 | 140 | 122,5 | 98 | 30 | 5 | 1 | 0,3 | 98 | 75 | 1300 | 2600 |
SBA 60AW | 60 | 4,7 | 60 | -0,015 | 150 | -0,018 | 45 | -0,4 | 37 | -0,3 | 33 | -0,3 | 160 | 140 | 108 | 35 | 7 | 1 | 0,3 | 108 | 92 | 1470 | 2940 |
SBA 70AW | 70 | 6,7 | 70 | -0,015 | 160 | -0,025 | 50 | -0,4 | 40 | -0,3 | 36 | -0,3 | 170 | 149,5 | 121 | 35 | 6 | 1 | 0,3 | 121 | 102 | 1600 | 3200 |
SBA 80AW | 80 | 7,2 | 80 | -0,015 | 180 | -0,025 | 50 | -0,4 | 42 | -0,3 | 36 | -0,3 | 194 | 168 | 130 | 42,5 | 6 | 1 | 0,3 | 130 | 115 | 2050 | 4100 |
SBA 100AW | 100 | 10,9 | 100 | -0,02 | 210 | -0,03 | 59 | -0,4 | 50 | -0,4 | 42 | -0,4 | 220 | 195,5 | 155 | 45 | 7 | 1 | 0,3 | 155 | 141 | 2400 | 4800 |
SBA 120AW | 120 | 13 | 120 | -0,02 | 230 | -0,03 | 64 | -0,4 | 52 | -0,4 | 45 | -0,4 | 245 | 214 | 170 | 52,5 | 8 | 1 | 0,3 | 170 | 162 | 2500 | 5000 |
SBA 140AW | 140 | 18,3 | 140 | -0,025 | 260 | -0,035 | 72 | -0,5 | 61 | -0,5 | 50 | -0,5 | 272 | 244 | 198 | 52,5 | 6 | 1,5 | 0,6 | 198 | 187 | 3250 | 6500 |
SBA 160AW | 160 | 23,8 | 160 | -0,025 | 290 | -0,035 | 77 | -0,5 | 65 | -0,5 | 52 | -0,5 | 310 | 272 | 213 | 65 | 7 | 1,5 | 0,6 | 213 | 211 | 3800 | 5700 |
SBA 180AW | 180 | 31,5 | 180 | -0,025 | 320 | -0,04 | 86 | -0,5 | 70 | -0,5 | 60 | -0,5 | 335 | 300 | 240 | 67,5 | 8 | 1,5 | 0,6 | 240 | 236 | 4250 | 6400 |
Bearing WithOut Seal |
Shaft Dia |
Mass (kg) |
Dimensions (d) |
Tolerance (d) |
Dimension (D) |
Tolerance (D) |
Tolerance (H) |
Dimensions (H) |
Dimensions (B) |
Tolerance (B) |
Dimensions (C) |
Tolerance (C) |
Dimensions (dk) |
Dimensions (d2) |
Dimensions (d3) |
Dimensions (s) |
Angle | Chamfer Dim R1s |
Chamfer Dim R2s |
Mounting (da) max |
Mounting (Da) min |
Load Ratings (dynCkN) |
Load Ratings (statCokN) |
SBA 200AW | 200 | 34,7 | 200 | -0,03 | 340 | -0,04 | 87 | -0,6 | 74 | -0,6 | 60 | -0,6 | 358 | 321 | 265 | 70 | 8 | 1,5 | 0,6 | 265 | 259 | 4700 | 7100 |
SBA 220AW | 220 | 44,7 | 220 | -0,03 | 370 | -0,04 | 97 | -0,6 | 82 | -0,6 | 67 | -0,6 | 388 | 350 | 289 | 75 | 7 | 1,5 | 0,6 | 289 | 279 | 5700 | 8800 |
SBA 240AW | 240 | 56,9 | 240 | -0,03 | 400 | -0,04 | 103 | -0,6 | 87 | -0,6 | 73 | -0,6 | 420 | 382 | 314 | 77,5 | 6 | 1,5 | 0,6 | 314 | 309 | 6850 | 10400 |
SBA 260AW | 260 | 71,3 | 260 | -0,035 | 430 | -0,045 | 115 | -0,7 | 95 | -0,7 | 80 | -0,7 | 449 | 409 | 336 | 82,5 | 7 | 1,5 | 0,6 | 336 | 332 | 7200 | 10800 |
SBA 280AW | 280 | 84 | 280 | -0,035 | 460 | -0,045 | 110 | -0,7 | 100 | -0,7 | 85 | -0,7 | 480 | 445 | 366 | 80 | 4 | 3 | 1 | 366 | 355 | 11400 | 17000 |
SBA 300AW | 300 | 88,5 | 300 | -0,035 | 480 | -0,045 | 110 | -0,7 | 100 | -0,7 | 90 | -0,7 | 390 | 460 | 388 | 90 | 3,5 | 3 | 1 | 388 | 375 | 11500 | 17300 |
SBA 320AW | 320 | 111 | 320 | -0,04 | 520 | -0,05 | 116 | -0,8 | 105 | -0,8 | 91 | -0,8 | 540 | 500 | 405 | 95 | 4 | 4 | 1,1 | 405 | 402 | 14100 | 21200 |
SBA 340AW | 340 | 117 | 340 | -0,04 | 540 | -0,05 | 116 | -0,8 | 105 | -0,8 | 91 | -0,8 | 550 | 510 | 432 | 95 | 4 | 4 | 1,1 | 432 | 402 | 15800 | 23600 |
SBA 360AW | 360 | 132 | 360 | -0,04 | 560 | -0,05 | 125 | -0,8 | 115 | -0,8 | 95 | -0,8 | 575 | 535 | 452 | 95 | 4 | 4 | 1,1 | 452 | 422 | 17000 | 25500 |
Radial Spherical Plain
Bearings
Series:
SBA... AW (Maintenance-Free)
![]() |
Home |
![]() |
Products |
![]() |
Product Quick Find |
![]() |
Company Profile |
![]() |
Contact Us |
Close Menu |
Axial spherical plain bearings
|
Close Window |
|
|
© 2002 SSR Bearings | Terms & Conditions of Use |
![]() |
|
Designed by WWW Marketing (Pty) Ltd | |
![]() |
The Spherical Plain Bearings can perform spatial oscillation motion even under load |
![]() |
The bearings are sealed on both sides |
![]() |
The bearings can support radial load |
![]() |
The bearings can be re-lubricated |
![]() |
The permissible operating temperature differs from the standard values |
![]() |
Features |
![]() |
The Rod Ends can perform spatial oscillation motion even under load |
![]() |
The bearings can support axial loads |
Close Window |