SSR Bearings

Bearing Without Seal	Shaft Dia	Dimensions (d)	Tolerance (d)	Dimension (D)	Dimensions (B)	Tolerance (B)	Dimensions (dk)	Dimensions (d1)	Dimensions (d2)	Dimensions (d3)	Dimensions (d4)	Dimensions (d5)	Dimensions (C2)	Dimensions (l3)	Dimensions (l4)	Dimensions (l7)	Angle	Load Ratings (dynCkN)	Load Ratings (statCokN)	Radial Internal Clear	Cylinder Force (kN)	Screws	Torque	Mass (kg)
SHNK12LO	12	12	+0.018	22	12	-0,18	18	15.5	32	M12x1.25	16.5	32	10,6	17	54	14	4	10,8	24	0,023-0,068	8	M5x12	8	0,1
SHNK16LO	16	16	+0.018	28	16	-0,18	23	20	40	M14x1,5	21	40	13	19	64	18	4	17,6	35,3	0,03-0,082	12,5	M6x16	13	0,2
SHNK20LO	20	20	+0,021	35	20	-0,21	29	25	47	M16x1,5	25	47	17	23	75,2	22	4	30	41,4	0,03-0,082	20	M8xM20	32	0,4
SHNK25LO	25	25	+0,021	42	25	-0,21	35,5	30,5	58	M20x1,5	30	54	17	29	94	27	4	48	69,9	0,037-0,1	32	M8xM20	32	0,66
SHNK32LO	32	32	+0,025	52	32	-0,25	44	38	70	M27x2	38	66	22	37	115	32	4	67	98,8	0,037-0,1	50	M10x25	64	1,2
SHNK40LO	40	40	+0,025	62	40	-0,25	53	46	89	M33x2	47	80	26	46	141,5	41	4	100	175	0,043-0,12	80	M10x25	64	2,1
SHNK50LO	50	50	+0,025	75	50	-0,25	66	57	108	M42x2	58	96	32	57	174	50	4	156	268	0,043-0,12	125	M12x30	110	4,4
SHNK63LO	63	63	+0,03	95	63	-0,3	83	71,5	132	M48x2	70	114	38	64	211	62	4	255	320	0,055-0,142	200	M12x35	80	7,6

Bearing Without Seal	Shaft Dia	Dimensions (d)	Tolerance (d)	Dimension (D)	Dimensions (B)	Tolerance (B)	Dimensions (dk)	Dimensions (d1)	Dimensions (d2)	Dimensions (d3)	Dimensions (d4)	Dimensions (d5)	Dimensions (C2)	Dimensions (l3)	Dimensions (l4)	Dimensions (l7)	Angle	Load Ratings (dynCkN)	Load Ratings (statCokN)	Radial Internal Clear	Cylinder Force (kN)	Screws	Torque	Mass (kg)
SHNK70LO	70	70	+0,03	105	70	-0,3	92	79	155	M56x2	80	135	42	76	245	70	4	315	475	0,055-0,142	250	M16x40	195	9,5
SHNK80LO	80	80	+0,03	120	80	-0,3	105	91	168	M64x3	90	148	48	86	270	78	4	400	527	0,055-0,142	320	M16x45	195	14,5
SHNK90LO	90	90	+0,035	130	90	-0,35	115	99	185	M72x3	100	160	52	91	296	85	4	490	660	0,055-0,142	400	M16x50	195	17
SHNK100L0	100	100	+0,035	150	100	-0,35	130	113	210	M80x3	110	178	62	96	322	98	4	610	840	0,065-0,165	500	M20x60	385	28
SHNK110LO	110	110	+0,035	160	110	-0,35	140	124	235	M90x3	125	190	62	106	364	105	4	655	1100	0,065-0,165	635	M20x60	385	32
SHNK125LO	125	125	+0,04	180	125	-0,4	160	138	262	M100x3	135	200	72	113	405	120	4	950	1393	0,065-0,165	800	M20x70	385	43
SHNK160LO	160	160	+0,04	230	160	-0,4	200	177	326	M125x4	165	250	82	126	488	150	4	1370	2080	0,065-0,192	1250	M24x80	660	80
SHNK200LO	200	200	0,046	290	200	-0,46	250	221	418	M160x4	215	320	102	161	620	195	4	2120	3456	0,065-0,192	2000	M30x100	1350	165

Dimension Table - Dimensions in mm

Select Diameter

Hydraulic rod ends

Are fitted with radial spherical plain bearings SBM..LO or SBM..DO
Have steel/steel sliding contact surface
Can support radial loads in a tensile or compressive direction
Can transmit moment-free motion and loads
Are suitable for alternating loads
Can be screw mounted using the thread in the shank
Can be welded in place by means of round or square welding faces
- Rod ends with circular welding face have a 45° welding chamfer and a centring option by means of a concentric locating pin

Rod ends with a circular welding face are particularly suitable for piston rods

Rod ends with a square welding face are particularly suitable for cylinder bases

Have a double slot shank for d = 50mm, single slot shank for d > 50mm
Reduplicated can be done with a taper design lubrication nipple.

Shaft Diameter - 12 to 200


© 2002 SSR Bearings	Terms & Conditions of Use

Designed by WWW Marketing (Pty) Ltd

	The Spherical Plain Bearings can perform spatial oscillation motion even under load
	The bearings are sealed on both sides
	The bearings can support radial load
	The bearings can be re-lubricated
	The permissible operating temperature differs from the standard values
	Features
	The Rod Ends can perform spatial oscillation motion even under load
	The bearings can support axial loads
Close Window