SSR Bearings

Bearing Without Seals	Shaft Dia	Dimensions (d)	Tolerance (d)	Dimension (D)	Dimensions (h2)	Dimensions (B)	Tolerance (B)	Dimensions (dk)	Dimensions (d1)	Dimensions (d2)	Dimensions (C1) Normal	Dimensions (C1) Max	Dimensions (l6)	Angle	Chamfer Dim R1s	Load Ratings (dynCkN)	Load Ratings (statCokN)	Radial Internal Clear	Mass (kg)
SHF 20DO	20	20	-0.01	35	38	16	-0.12	29	24.1	50	19	20	63	9	0.3	30	65.5	0.03-0.082	0.35
SHF 25DO	25	25	-0.01	42	45	20	-0.12	35.5	29.3	55	23	24	72.5	7	0.6	48	68.7	0.037-0.1	0.53
SHF 30DO	30	30	-0.01	47	51	22	-0.12	40.7	34.2	65	28	29	83.5	6	0.6	62	115	0.037-0.1	0.87
SHF 35DO	35	35	-0.012	55	53	25	-0.12	47	34.7	83	30	31	102.5	6	0.6	80	193	0.037-0.1	1.5
SHF 40DO	40	40	-0.012	62	69	28	-0.12	53	45	100	35	36.5	119	7	0.6	100	305	0.043-0.12	2.4
SHF 45DO	45	45	-0.012	68	77	32	-0.12	60	50.7	110	40	41.5	132	7	0.6	127	386	0.043-0.12	3.4
SHF 50DO	50	50	-0.012	75	88	35	-0.12	66	55.9	123	40	41.5	149.5	6	0.6	156	441	0.043-0.12	4.4
SHF 60DO	60	60	-0.015	90	100	44	-0.15	80	66.8	140	50	52.5	170	6	1	245	558	0.043-0.12	7.1
SHF 70DO	70	70	-0.015	105	115	49	-0.15	92	77.8	164	55	58	197	6	1	315	724	0.055-0.142	10.5
SHF 80DO	80	80	-0.015	120	141	55	-0.15	105	89.4	180	60	63	231	6	1	400	804	0.055-0.142	15
SHF 90DO	90	90	-0.02	130	150	60	-0.2	115	98.1	226	65	69	263	5	1	490	1352	0.055-0.142	23.5
SHF 100DO	100	100	-0.02	150	170	70	-0.2	130	109.5	250	70	74	295	7	1	610	1516	0.065-0.165	31.5
SHF 110DO	110	110	-0.02	160	185	70	-0.2	140	121.2	295	80	85	332.5	6	1	655	2340	0.065-0.165	48
SHF 120DO	120	120	-0.02	180	210	85	-0.2	160	135.5	360	90	95	390	6	1	950	3510	0.065-0.165	79

Dimension Table - Dimensions in mm

Hydraulic rod ends

Are fitted with radial spherical plain bearings SBM..LO or SBM..DO
Have steel/steel sliding contact surface
Can support radial loads in a tensile or compressive direction
Can transmit moment-free motion and loads
Are suitable for alternating loads
Can be screw mounted using the thread in the shank
Can be welded in place by means of round or square welding faces
- Rod ends with circular welding face have a 45° welding chamfer and a centring option by means of a concentric locating pin

Rod ends with a circular welding face are particularly suitable for piston rods

Rod ends with a square welding face are particularly suitable for cylinder bases

Have a double slot shank for d = 50mm, single slot shank for d > 50mm
Reduplicated can be done with a taper design lubrication nipple.

Shaft Diameter - 20 to 120


© 2002 SSR Bearings	Terms & Conditions of Use

Designed by WWW Marketing (Pty) Ltd

	The Spherical Plain Bearings can perform spatial oscillation motion even under load
	The bearings are sealed on both sides
	The bearings can support radial load
	The bearings can be re-lubricated
	The permissible operating temperature differs from the standard values
	Features
	The Rod Ends can perform spatial oscillation motion even under load
	The bearings can support axial loads
Close Window