SSR Bearings

With Clamp	Shaft Dia	Dimensions (d)	Tolerance (d)	Dimension (D)	Dimensions (h1)	Dimensions (B)	Tolerance (B)	Dimensions (dk)	Dimensions\| (d1)	Dimensions (d2)	Dimensions (d3)	Dimensions (d4)	Dimensions (d5)	Dimensions (C1) Normal	Dimensions (l3)	Dimensions (l4)	Dimensions (l7)	Angle	Load Ratings (dynCkN)	Load Ratings (statCokN)	Radial Internal Clear	Screws	Torque	Mass (kg)
SHRK 20DO	20	20	-0,01	35	50	16	-0,12	29	24,1	56	M16*1,5	25	41	19	17	78	25	9	30	81,1	0,03-0,082	M8x20	32	0,43
SHRK 25DO	25	25	-0,01	42	50	20	-0,12	35,5	29,3	56	M16*1,5	25	41	23	17	78	25	7	48	65,4	0,037-0,1	M8x25	32	0,48
SHRK 30DO	30	30	-0,01	47	60	22	-0,12	40,7	34,2	64	M22,1,5	32	46	28	23	92	30	6	62	96,7	0,037-0,1	M8x25	32	0,74
SHRK 35DO	35	35	-0,012	55	70	25	-0,12	47	39,7	78	M28*1,5	40	58	30	29	109	38	6	80	140	0,037-0,1	M10x30	64	1,2
SHRK 40DO	40	40	-0,012	62	85	28	-0,12	53	45	94	M35*1,5	49	66	35	36	132	45	7	100	227	0,043-0,12	M10x35	64	2
SHRK 50DO	50	50	-0,012	75	105	35	-0,12	66	55,9	116	M45*1,5	61	88	40	46	163	55	6	156	333	0,043-0,12	M12x35	110	3,8
SHRK 60DO	60	60	-0,015	90	130	44	-0,15	80	66,8	130	M58*1,5	75	90	50	59	200	65	6	245	326	0,043-0,12	M10x45	46	5,4
SHRK 70DO	70	70	-0,015	105	150	49	-0,15	92	77,8	156	M65*1,5	86	100	55	66	232	75	6	315	440	0,055-0,142	M12x50	80	8,5
SHRK 80DO	80	80	-0,015	120	170	55	-0,15	105	89,4	176	M80*2	102	125	60	81	265	80	6	400	550	0,055-0,142	M16x50	195	12
SHRK 90DO	90	90	-0,02	130	210	60	-0,2	115	98,1	206	M100*2	124	146	65	101	323	90	5	490	810	0,055-0,142	M16x60	195	21,5
SHRK 100DO	100	100	-0,02	150	235	70	-0,2	130	109,5	230	M110*2	138	166	70	111	360	105	7	610	920	0,065-0,165	M20x60	385	27,5
SHRK 110DO	110	110	-0,02	160	265	70	-0,2	140	121,2	265	M120*3	152	190	80	125	407,5	115	6	655	1382	0,065-0,165	M20x70	385	40,5
SHRK 120DO	120	120	-0,02	180	310	85	-0,2	160	135,5	340	M130*3	172	217	90	135	490	140	6	950	2373	0,065-0,165	M24x80	660	76

Hydraulic rod ends

Are fitted with radial spherical plain bearings SBM..LO or SBM..DO
Have steel/steel sliding contact surface
Can support radial loads in a tensile or compressive direction
Can transmit moment-free motion and loads
Are suitable for alternating loads
Can be screw mounted using the thread in the shank
Can be welded in place by means of round or square welding faces
- Rod ends with circular welding face have a 45° welding chamfer and a centring option by means of a concentric locating pin

Rod ends with a circular welding face are particularly suitable for piston rods

Rod ends with a square welding face are particularly suitable for cylinder bases

Have a double slot shank for d = 50mm, single slot shank for d > 50mm
Reduplicated can be done with a taper design lubrication nipple.

Close Window

	The Spherical Plain Bearings can perform spatial oscillation motion even under load
	The bearings are sealed on both sides
	The bearings can support radial load
	The bearings can be re-lubricated
	The permissible operating temperature differs from the standard values
	Features
	The Rod Ends can perform spatial oscillation motion even under load
	The bearings can support axial loads
Close Window

	Home
	Products
	Product Quick Find

	Company Profile
	Contact Us
Close Menu


© 2002 SSR Bearings	Terms & Conditions of Use

Designed by WWW Marketing (Pty) Ltd